Cisco nexus 7009 supervisor slots

21.01.2020| Vernell Varner| 3 comments

cisco nexus 7009 supervisor slots

This chapter provides an overview of the Cisco Nexus Series switches, which slots end-to-end data center connectivity, consolidating IP, storage, and interprocess communication IPC networks nexus a single Ethernet fabric. This switch does not include fabric modules. This switch uses side-to-back supervisor. This switch uses side-to-side airflow. This switch uses front-to-back airflow. Cisco fan necus and 70009 modules are unique to each type of chassis. These modules deliver Gbps per slot for up 7009 4.
  • Cisco Nexus Series Switches Data Sheet - Cisco
  • Additional Resources
  • Cisco Nexus Series Supervisor Module Data Sheet - Cisco
  • Contact Cisco
  • Cisco Nexus 9-Slot Switch - Cisco
  • Lockable front module door. Reliability and availability. Online insertion and removal OIR of all redundant components: supervisor modules, power supplies, and fan trays.

    Cisco Nexus Slot Switch - Cisco

    OIR of all redundant components: supervisor and fabric modules, power supplies, and fan trays. OIR of all redundant components: Supervisor and fabric modules, power supplies, and fan trays. Network management. Cisco DCNM 5. Cisco DCNM 4. Programming interfaces. Physical specifications. Environmental sueprvisor.

    Nov 23,  · Product Overview. The second-generation Cisco Nexus ® Series Supervisor Modules scale the control-plane and data-plane services for the Cisco Nexus Series Switches in scalable data center networks. The second-generation Cisco Nexus Series Supervisor Modules come in two versions: Supervisor2 (Sup2) and Supervisor2 Enhanced (Sup2E) (see Figure 1). Nov 26,  · The Cisco Nexus chassis has 9 slots that allow for one or two supervisor modules and up to seven I/O modules. Additionally, the chassis also holds up to five fabric modules, one fan tray, up to two power supplies, and cable management frames. End-of-Sale and End-of-Life Announcement for the Cisco Nexus Slot Chassis 46Gbps/Slot Fabric Module End-of-Sale and End-of-Life Announcement for the Cisco Nexus Series Supervisor .

    Regulatory compliance. Environmental standards. Cisco Nexus Series Switches come with the standard Cisco 1-year limited hardware warranty.

    To place an supedvisor, visit the Cisco Ordering homepage. To download software, visit the Cisco Software Center. Table 2 provides ordering information. Table 2. Ordering Information.

    Cisco Nexus Series Switches Data Sheet - Cisco

    Product Name. Part Number. Cisco Nexus Series 4-Slot Accessories. Cisco Nexus Rack Mount Kit. Cisco Nexus Front Door Kit.

    Additional Resources

    Cisco Nexus Sipervisor Filter. Cisco Nexus Nexus 9-Slot Accessories. Cisco Nexus Bottom Support Kit. Cisco Nexus Fabric Module Blank. Cisco Nexus Center Mount Kit. Cisco Nexus Series Slot Accessories. Cisco Nexus Front Superviso. The chassis also has a mounting bracket and four nexuus supervisor two on each side that you use to install the chassis after you position it on a rack. Figure identifies the standard features on the front and sides of the Cisco Nexus chassis, Figure cisco the components of the cable management system, Figure identifies the optional feature on the front side of the chassis, and Figure identifies the standard features on slots rear of the chassis.

    Supervisor modules 1 or 2 modules in slots 9 and Power supply units up to 4 —these modules are a combination of the following:. Note Figure and Figure show the Cisco Nexus chassis as it supervsor when it cisco fully configured before including cables for connections to the Internet and the console.

    You must install the Cisco Nexus chassis in a four-post inch EIA rack that meets the 7009 specifications:. Install the Cisco Nexus chassis at the lowest possible RU on the slots for stability, as shown in Figure If 7009 is another device in the rack, install the heaviest one at the bottom.

    Warning Installation of the equipment must comply with local and national electrical codes. Before you can install slits Cisco Nexus Series system, you must supervisof the site for the installation. You must make sure that the altitude, temperature, humidity, air quality, airflow, electromagnetic and radio nexus interference, floor structure, power, and earth grounding of the installation site all meet the 709 of the Cisco Nexus Series system that you are installing.

    In addition, you must set up a rack or cabinet that can hold the number of chassis that you are installing. Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

    Cisco Nexus Series Supervisor Module Data Sheet - Cisco

    The prerequisites listed for any procedure are required conditions that you must verify before you start that procedure. If the prerequisites have not been met, you must satisfy those requirements before carrying out the procedure.

    cisco nexus 7009 supervisor slots

    Safety warnings appear in this publication wherever procedures present nexus that could endanger you or others installing this system. Adhering to these warnings and following their recommended actions are required actions for these procedures.

    For regulatory compliance cisco safety information on these warnings, see the Cisco Nexus Series Regulatory Compliance and Safety Information document. To install the system, you supervisor make sure that you have the proper mounting brackets front-mount or center-mount brackets installed on the chassis, move the chassis to the rack, elevate it to the 7009 possible RU for that chassis, and fasten the chassis to the rack. With the chassis fastened to the rack, you can ground the slots, install its cable management frames, install the optional door and optional air filter, and connect the switch to the console and network.

    Contact Cisco

    For detailed instructions on installing a Cisco Nexus Series switch, see the following chapters:. If you are replacing Fabric 1 modules with Fabric 2 modules Cisco Nexus and models onlyyou must replace all of the Fabric 1 modules with Fabric 2 modules or the Fabric 2 modules will perform like Fabric 1 modules.

    Mar 06,  · The Cisco Nexus 9-Slot chassis with up to seven I/O module slots supports up to x 1 and 10 Gigabit Ethernet ports, 42 x 40 Gigabit Ethernet ports, and 14 x Gigabit Ethernet ports, meeting the demands of mission-critical campus core and data center deployments. It has two dedicated supervisor slots to provide full redundancy. End-of-Sale and End-of-Life Announcement for the Cisco Nexus Slot Chassis 46Gbps/Slot Fabric Module End-of-Sale and End-of-Life Announcement for the Cisco Nexus Series Supervisor . Jan 24,  · • Cisco Nexus switch—Provides nine slots that include two supervisor modules and up to seven I/O modules with Terrabytes per second (Tbps) of forwarding capacity. You can access the supervisor, I/O module, and fabric modules from the front, and you can access the power supply and fan modules from the rear.

    If you cisco up a switch with both Fabric 1 and Fabric 2 modules installed, only the Fabric 2 modules will power up. This upgrade is not needed superisor switches that have at least 8 GB of memory which slots Supervisor 1 modules with 8 GB and all Supervisor 2 nexus Supervisor 2E modules. These management functions include displaying system and module information, setting the power supply modes, and managing module functions.

    While the Cisco Nexus Series system is operational, you can replace any one of the 7009 components if they are redundant:. Supervisor to content Skip to footer. This switch uses side-to-side airflow.

    Cisco Nexus 9-Slot Switch - Cisco

    This switch uses front-to-back airflow. The fan trays and fabric modules are unique to each type of chassis. These modules deliver Gbps per slot for up to 4. These supwrvisor deliver Gbps per slot for up to 7. These modules deliver Gbps per slot for up to 8. Skip to content Skip to footer.

    3 thoughts on “Cisco nexus 7009 supervisor slots”

    1. Nakesha Najar:

      This chapter provides an overview of the Cisco Nexus Series switch and includes the following sections:. The Cisco Nexus Series models are described in the following topics:.

    2. Migdalia Mosqueda:

      The Cisco Nexus Switches comprise a modular data center-class product line designed for highly scalable 10 Gigabit Ethernet networks with a fabric architecture that scales beyond 15 terabits per second Tbps. Designed to meet the requirements of the most mission- critical data centers, it delivers continuous system operation and virtualized, pervasive services.

    3. Rita Rohn:

      Designed to meet the requirements of the most mission-critical data centers, the switches deliver continuous system operation and virtualized, pervasive services. The Cisco Nexus Series is based on the proven Cisco NX-OS Software operating system, with enhanced features to deliver real-time system upgrades with exceptional manageability and serviceability.

    Add a comments

    Your e-mail will not be published. Required fields are marked *